Home FAQ

All-in-One LED Advertising Display

13 Oct, 2026

Note: All the following questions and answers are based on the actual product specifications and no parameters not provided have been fabricated. The specific figures (voltage, power, protection level, beam angle, point spacing, brightness, weight, size, lifespan, etc.) cited in each answer are all derived from the specification table.

01.What are the screen size and weight of the all-in-one advertising display? Is it easy to move?

The WE Series all-in-one advertising display has a screen size of 1280×1920mm and a total weight of 80KG. Compared with traditional split-type screens, it features an integrated design — simply connect power on site and it is ready to use. With its 80KG weight and folding structure, two people can move and position it.

02.Can the all-in-one advertising display be folded for transportation? Is shipping expensive?

Yes. The WE Series supports three-side folding. After folding, the volume is greatly reduced, making it convenient to transport by ordinary truck, reducing shipping costs, and also facilitating transfers between stores and warehousing. Dual-sided, splicing, and GOB process versions are also available.

03.What pixel pitches are available for the all-in-one advertising display? Which is the clearest?

The WE Series offers four pixel pitches: P1.25 / P1.53 / P1.86 / P2.5. The smaller the pixel pitch, the clearer the image. P1.25 is the clearest, suitable for high-definition advertising displays in close-distance stores and shopping mall atriums; P2.5 has lower cost and is suitable for slightly longer viewing distances.

04.What is the power consumption of the all-in-one advertising display? Is the electricity cost high?

The WE Series maximum power consumption ranges from 900W (P2.5) to 1600W (P1.25), with average power consumption of 300–540W. P1.25 has higher power consumption due to denser pixels and higher brightness. In daily operation, it runs at average power consumption, so electricity costs are controllable and suitable for long-term always-on playback in stores.

05.Does the all-in-one advertising display support dual-sided display? Can both sides of the store see it?

Yes. In addition to three-side folding, the WE Series also supports dual-sided display, allowing customers on both sides of the street and at store entrances/exits to see the advertising content simultaneously, increasing exposure. Multiple units can also be spliced into a larger image.

06.What is the GOB process? What benefits does it bring to the advertising display?

GOB is a surface glue encapsulation process. The WE Series all-in-one advertising display supports the GOB process, which makes the screen surface flatter, dustproof, moisture-proof, and impact-resistant. It is suitable for crowded store and shopping mall environments, extending screen lifespan and reducing the risk of dust ingress and dead pixels.

07.Is the all-in-one advertising display suitable for store entrances or shopping mall atriums?

Both are suitable. The 1280×1920mm vertical large screen is ideal for store windows and entrances for product advertising and promotions. High-definition models such as P1.25/P1.53 deliver fine visuals for close-distance viewing in shopping mall atriums. The 80KG all-in-one unit is ready to use once powered on, with no on-site assembly required.

08.Can multiple all-in-one advertising displays be spliced into a large screen?

Yes. The WE Series supports splicing. Multiple 1280×1920mm all-in-one units can be spliced into a larger advertising wall for shopping mall atriums, auto shows, launch events, and other occasions requiring a large image. They can also be flexibly arranged with dual-sided and folding configurations.

09.How much difference in power consumption is there between P1.25 and P2.5 all-in-one units?

In terms of maximum power consumption, P2.5 is 900W and P1.25 is 1600W, a difference of about 700W. The average power consumption range is 300–540W. P1.25 has denser pixels (smallest pixel pitch, clearest image), so its screen-on power consumption is higher. When choosing a model, simply balance clarity and electricity cost.

10.Is installation of the all-in-one advertising display troublesome? Is a professional engineering team required?

Not troublesome. The WE Series is an all-in-one unit with a 1280×1920mm screen and 80KG weight. It can be fixed to a bracket on site and powered on to play — no need for on-site cabinet assembly and module debugging like rental screens. Stores and exhibition halls can complete basic installation themselves.

11.Can the all-in-one advertising display be used outdoors? How is the protection?

The WE Series specifications do not provide an IP protection rating, so it is not recommended for direct use as outdoor rain-exposed equipment. It is more suitable for semi-outdoor or indoor scenarios such as store windows, shopping malls, and exhibition halls. If an outdoor rain-exposed environment is required, it is recommended to confirm the protection configuration separately or choose an outdoor rental screen clearly rated IP65.

12.What is the lifespan of the all-in-one advertising display?

The specifications do not separately list a lifespan value for the WE Series. However, it uses the GOB process (dustproof, moisture-proof, impact-resistant) and supports long-term always-on playback. With reasonable average power consumption (300–540W), it is suitable for year-round advertising use in stores. The specific lifespan is subject to the manufacturer's actual testing.